Technical Data

ST 5 – 220

CIRCULAR SAW

  • Cast iron saw-spindle moulder worktable dim mm 1380 x 465
  • Blade’s tilting 90° ÷ 45°
  • Max saw blade Ø with scoring blade installed mm 350
  • Max saw blade projection from table at 90°/45° mm 118/84
  • Diametro lama incisore mm 120
  • Squaring stroke (standard) mm 2200
  • Cutting width on parallel fence (standard) mm 1000

SPINDLE MOULDER

  • Max useful spindle lenght mm 125
  • Spindle moulder speed (at 50 hz) g/1’ 3500/6000/8000/10000
  • Max tool diameter when profiling mm 240
  • Ø max utensile rientrante sotto il piano a 90° mm 240
  • Three-phase motors 4kW 5,5 HP 50 hZ
  • Three-phase motors (scoring) 0,55kW 0,75 HP 50Hz
  • Exhaust outlets diameter mm 120
  • Net weight Kg 900

ST 5 – 260

CIRCULAR SAW

  • Cast iron saw-spindle moulder worktable dim mm 1380 x 465
  • Blade’s tilting 90° ÷ 45°
  • Max saw blade Ø with scoring blade installed mm 350
  • Max saw blade projection from table at 90°/45° mm 118/84
  • Diametro lama incisore mm 120
  • Squaring stroke (standard) mm 2600
  • Cutting width on parallel fence (standard) mm 1000

SPINDLE MOULDER

  • Max useful spindle lenght mm 125
  • Spindle moulder speed (at 50 hz) g/1’ 3500/6000/8000/10000
  • Max tool diameter when profiling mm 240
  • Max diam. of tool lowered under the table at 90°mm 240
  • Three-phase motors4kW 5,5 HP 50 hZ
  • Three-phase motors (scoring)0,55kW 0,75 HP 50Hz
  • Exhaust outlets diameter mm 120
  • Net weight Kg 940

ST 5 – 320

CIRCULAR SAW

  • Cast iron saw-spindle moulder worktable dim mm 1380 x 465
  • Blade’s tilting  90° ÷ 45°
  • Max saw blade Ø with scoring blade installed mm 350
  • Max saw blade projection from table at 90°/45°mm 118/84
  • Diametro lama incisore mm 120
  • Squaring stroke (standard) mm 3200
  • Cutting width on parallel fence (standard) mm 1000

SPINDLE MOULDER

  • Max useful spindle lenght mm 125
  • Spindle moulder speed (at 50 hz) g/1’ 3500/6000/8000/10000
  • Max tool diameter when profiling mm 240
  • Max diam. of tool lowered under the table at 90° mm 240
  • Three-phase motors4kW 5,5 HP 50 hZ
  • Three-phase motors (scoring) 0,55kW 0,75 HP 50Hz
  • Exhaust outlets diametermm 120
  • Net weight Kg 990

Spindle moulder available with following diameters: 30 – 35 – 40 – 50 mm, 3/4 “ – 1 “ – 1  1 / 4 “

Equipment

STANDARD EQUIPMENT

  • Units adjustment hand wheels ergonomically positioned on the front of the machine
  • Digital readout (1/10 mm) for blades tilting, thicknessing table height and spindle moulder position
  • Extruded anodized aluminium sliding table (dimensions 330 x 146 x 2250 mm) sliding on high precision hardened steel guideways, which are fixed by means of mechanical bending system
  • Cast iron saw unit, with lifting system by means of “dove-tail” guideways and tilting on high rigidity sliding side trunnions, complete with scoring unit with independent motor and external setting up
  • Squaring frame (dimensions 1200x650mm) complete with telescopic fence with 2 flip-over stops, eccentric lamp, swinging arm support and idle roller to facilitate the panel loading/unloading
  • Dedicated saw parallel fence (lunghezza 1500 mm)
  • Spindle moulder reverse rotation
  • Spindle moulder speed readout by LEDs
  • Adjustable spindle moulder fence, with reference pins for easy re-positioning and numeric readout for micrometric adjustments
  • Angular cutting device with flip-over stops equipped with telescopic fence with two flip-over stops and pre-set for angle rapid selection
  • Pre-set angular cutting device directly positioned on squaring frame
  • Electrical protections
  • Emergency push buttons and main switch

EQUIPMENT FOR “CE” NORMS

  •   Saw-spindle moulder with devices in conformity with European safety regulations and complete with:
  1. Self-braking motors
  2. Overhead blades guard
  3. Spindle moulder for shaping operations
  4. ON/OFF push buttons for saw and spindle moulder motors on operator position

Options on Demand

  • Version with maximum squaring stroke 2660 mm
  • Version with maximum squaring stroke 3260 mm
  • Additional table on the sliding table for the support of panels with large dimensions
  • 2 saw blade rotatiting speeds (3500/5000 rpm)
  • Cutting width on the parallel fence 1270mm
  • Anodized aluminium tables for spindle moulder fence
  • Tenonig table and protection hood max tool Ø 275 mm (max. tool Ø 275 mm)
  • Tenonig table and protection hood max tool Ø 320 mm (max. tool Ø 320 mm, with electric limitation at 3500 rpm at 50 Hz, available only with 40 mm min spindle diameter)
  • Tiltable spindle moulder 90°/45° equipped with fixed handwheel with gravitational numerical readout of spindle moulder tilting
  • Electric pre-setting and flip over support for feeder
  • 2 three-phase motors kW 5,5 hp 7,5 hz 50 (not availbale with frequency 60 Hz)

REQUEST A QUOTE

Fill out the contact form to immediately send your request.
We will reply by email within 48 hours or contact you to investigate your needs.