ST 4
Technical Data
ST 4 – 160
CIRCULAR SAW
- Cast iron saw-spindle moulder worktable dim mm 1250 x 430
- Blade’s tilting 90° ÷ 45°
- Max saw blade Ø with scoring blade installed mm 315
- Max saw blade projection from table at 90°/45° mm 100/70
- Squaring stroke (standard) mm 1660
- Cutting width on parallel fence (standard) mm 900
SPINDLE MOULDER
- Max useful spindle lenght mm 125 (70 con albero 3/4”)
- Spindle moulder speed (at 50 hz) g/1’ 3500/6000/8000/10000
- Max tool diameter when profiling mm 210
- Max diam. of tool lowered under the table at 90° mm 240
- Three-phase motors 3 kW 4 HP 50 hZ
- Exhaust outlets diameter mm 120
- Net weight Kg 620
ST 4 – 220
CIRCULAR SAW
- Cast iron saw-spindle moulder worktable dim mm 1250 x 430
- Blade’s tilting 90° ÷ 45°
- Max saw blade Ø with scoring blade installed mm 315
- Max saw blade projection from table at 90°/45° mm 100/70
- Squaring stroke (standard) mm 2310
- Cutting width on parallel fence (standard) mm 900
SPINDLE MOULDER
- Max useful spindle lenght mm 125 (70 con albero 3/4”)
- Spindle moulder speed (at 50 hz) g/1’ 3500/6000/8000/10000
- Max tool diameter when profiling mm 210
- Max diam. of tool lowered under the table at 90° mm 240
- Three-phase motors 3 kW 4 HP 50 hZ
- Exhaust outlets diameter mm 120
- Net weight Kg 650
ST 4 – 260
CIRCULAR SAW
- Cast iron saw-spindle moulder worktable dim mm 1250 x 430
- Blade’s tilting 90° ÷ 45°
- Max saw blade Ø with scoring blade installed mm 315
- Max saw blade projection from table at 90°/45° mm 100/70
- Squaring stroke (standard) mm 2660
- Cutting width on parallel fence (standard) mm 900
SPINDLE MOULDER
- Max useful spindle lenght mm 125 (70 con albero 3/4”)
- Spindle moulder speed (at 50 hz) g/1’ 3500/6000/8000/10000
- Max tool diameter when profiling mm 210
- Max diam. of tool lowered under the table at 90° mm 240
- Three-phase motors 3 kW 4 HP 50 hZ
- Exhaust outlets diameter mm 120
- Net weight Kg 670
Equipment
STANDARD EQUIPMENT
- Extruded anodized aluminium sliding table sliding on high precision hardened steel guideways
- Cast iron saw unit with lifting system ny means of ‘dove-tail’ guideways and tilting on side trunnions
- Squaring frame (dimensions 1200 x 650 mm) complete with:
- – Telescopic fence with 2 flip-over stops and eccentric clamp
- – Swinging arm support
- – Idle roller to facilitate the panel loading/uploading
- Dedicated saw parallel fence (lenght 1200 mm)
- Spindle moulder protection with micrometric adjustment
- Electrical protections
- Emergency pushbuttons in every working position
EQUIPMENT FOR “CE” NORMS
- Saw-spindle moulder with devices in conformity with European safety regulations and complete with:
- – self-braking motor on spindle moulder unit
- – ON-OFF pushbuttons for saw and spindle moulder motors on operator position
Options on Demand
- Version with maximum squaring stroke 2310 mm
- Version with maximum squaring stroke 2660 mm
- Belt driver scoring unit complete with blade Ø 100 mm Z 20 with external setting up
- Scoring unit with independent motor complete with blade Ø 100 mm Z 20 with external setting up
- Scoring’s motor 0,55 kW 0,75 HP 50 Hz
- Additional table on the sliding table support well-dimensioned panels
- Angular cutting device equipped with:
- – Telescopic fence with two flip-over stops
- – Pre-set for angle rapid selection
- Pre-set angular cutting device directly positioned in squaring frame
- Cutting width with parallel fence 1270 mm
- Rounf sliding bar on parallel fence complete with:
- – Rectified steel round sliding bar Ø 45 mm
- – Micrometric adjustment and cam-locking system
- – “High rigidity” cast iron fence support
- Spindle moulder fence with 3 controlled adjustements with reference pins foreasy re-positioning and numeric readouts form micrometric
- adjustments Ø max tool : 240 x 85 mm
- Anodized alu tables for spinale moulder fence (suitable only for spindle moulder fence with 3 controlled adjustements)
- Anodized alu tables for spinale moulder fence (suitable only for item standard spindle moulder fence
- Tenoning table and protection hood max Ø 275 mm (max Ø tools 275 mm)
- Tiltable spindle moulder 90-45° with handwheel on front machine including exhaust outlet unter the worktable
- Electric pre-setting and flip pver support for feeder
- Reverse spindle rotation (no CE)
- Reverse spindle rotation (CE) (available only for machine with 3-phases motor, with 4 kW o 5,5 kW motors only)
- Exhaust outlet under the worktable
- 2 three-phase motors HP 5,5 kW 4 Hz 50 (HP 6,6 kW 4,8 Hz 60)
ASK FOR A QUOTE
Fill out the contact form to send us your request immediately.
We will reply via email or contact you within 48h to investigate your needs.
