TMX

The circular saws for wood or squaring machines for wood are part of those indispensable machines that allow you to cut any kind of wood with long and straight cuts, obtaining high precision cuts. The peculiarity of squaring machines consists in the possibility of squaring panels of any size.

Download PDF

Technical Data

TMX 260

  • Main motor (saw blade)  Kw (Hp)  4 (5,5)
  • Scorer motor  Kw (Hp)  0,55 (0,75)
  • Overall dimensions of the carriage  mm  2600×340
  • Length of cut from the scorer’s blade  mm 2600
  • Capacity of cutting saw blade/fencemm 1250
  • Overall dimensions of fixed cast iron table  mm  840X530
  • Ø saw blade mm  300 – 350
  • Ø scorer blade  mm  100
  • Height of cut with Ø 300 (Ø 350) blade at 90°  mm 95 (120)
  • Rotation speed of the saw blade shaft  g/1’ 4500
  • Rotation speed of the scorer shaft g/1’ 8700
  • 2 suction hoods for connection to the suction system   60/100
  • Net weight kg  600

TMX 320

  • Main motor (saw blade) Kw (Hp) 4 (5,5)
  • Scorer motor Kw (Hp) 0,55 (0,75)
  • Overall dimensions of the carriage mm 3200×340 (420 optional)
  • Length of cut from the scorer’s blade   mm 3200
  • Capacity of cutting saw blade/fence  mm  1250
  • Overall dimensions of fixed cast iron table mm  840X530
  • Ø saw blade  mm  300 – 350
  • Ø scorer blade   mm  100
  • Height of cut with Ø 300 (Ø 350) blade at 90°  mm 95 (120)
  • Rotation speed of the saw blade shaft  g/1’ 4500
  • Rotation speed of the scorer shaft   g/1’ 8700
  • 2 suction hoods for connection to the suction system  60/100
  • Net weight  kg   620

Equipment

STANDARD EQUIPMENT

  •   Scoring unit with independent motor
  •   Manual delta/start switch
  •   Anodized alu carriage
  •   Gauge for the tilting saw blade
  •   Saw protection type ‘ALFA’
  •   Squaring fence with goniometer for wide cutting angles
  •   Mitre fence (600 mm) with goniometer for small cutting angles
  •   Goniometer with fixed positions at 7,5° – 15° – 18° – 22,5° – 30° – 36° – 45°
  •   Clamping device
  •   Wide out-feeding table extension
  •   Maintenance manual and spanners
EQUIP. – “CE” SAFETY REGULATIONS

  •   Self-braking motor
  •   Low tension electric system
  •   Support for the suction tube

Options on Demand

  • Saw protection with suction installation (compulsory for CE version with a Ø 350 mm saw blade)
  • Carriage of 3200 x 420 mm sliding with ball-bearings(mod. “TMS”)
  • Carriage of 3200 x 420 mm sliding by a rolls’ system on rectified bars (mod. “TMS”)
  • Motor HP 7,5
  • 1-phase motors (saw blade HP 3; scorer blade HP 0,75)
  • Widia scoring blade Ø 100 mm
  • Widia saw blade Ø 350 mm
  • Cutting capacity saw blade/fence up to 1.500 mm
  • Overload protection with emergency switch (no CE version only)
  • Self-braking motor with brake release, overload protection and emergency switch (no CE version only)
  • Rise & fall of the blade by means of a frontal hand-wheel
  • Extensible roll at table’s extension
  • Digital reader by battery on squaring fence
  • Stop of the carriage at any position
  • Suction support for saw blade safety guard – mod. ‘ALFA’ (for no CE version only)
  • Packing: structure including 2 pieces of machines superposed
  • Powered tilting of the saw blade
  • Powered up / down of the saw blade

REQUEST A QUOTE

Fill out the contact form to immediately send your request.
We will reply by email within 48 hours or contact you to investigate your needs.