SC 40

The circular saws for wood or squaring machines for wood are part of those indispensable machines that allow you to cut any kind of wood with long and straight cuts, obtaining high precision cuts. The peculiarity of squaring machines consists in the possibility of squaring panels of any size.

Download PDF

Technical Data

SC 40 – 260

  • Cast iron saw-spindle moulder worktable dim. mm 940 x 560
  • Blade tilting 90° ÷ 45°
  • Max saw blade diam. with scoring blade installed mm 400
  • Max saw blade projection from table at 90°/45° mm 138/98
  • Scoring blade diameter mm 120
  • Squaring stroke (standard) mm 2660
  • Cutting width on parallel fence mm 1270
  • Three-phase motor 4 kW 5,5 HP 50 Hz
  • Three-phase motor (scoring) 0,55 kW 0,75 HP 50 Hz
  • Suction hood for connection to the suction unit mm 120
  • Net weight kg 690

SC 40 – 320

  • Cast iron saw-spindle moulder worktable dim. mm 940 x 560
  • Blade tilting 90° ÷ 45°
  • Max saw blade diam. with scoring blade installed mm 400
  • Max saw blade projection from table at 90°/45° mm 138/98
  • Scoring blade diameter mm 120
  • Squaring stroke (standard) mm 3260
  • Cutting width on parallel fence mm 1270
  • Three-phase motor 4 kW 5,5 HP 50 Hz
  • Three-phase motor (scoring) 0,55 kW 0,75 HP 50 Hz
  • Suction hood for connection to the suction unitmm 120
  • Net weight kg 720

Equipment

STANDARD EQUIPMENT

  •   Readout of sawblades tilt on the machine front side
  •   Estrude anodized aluminium sliding table (dimensions 330x146x2600 mm) sliding on high precision hardened steel guideways, which are fixed by means of mechanical bending system
  •   Cast iron saw unit, with lifting system by means of “dove-tail” guideways and tilting on high rigidity sliding side trunnions, complete with scoring unit independent motor and external setting up
  •   Squaring frame (dimensions 1200×650 mm) complete with:
  1. –          Telescopic fence with 2 flip-over stops and eccentric clamp
  2. –          Swinging arm support
  3. –          Idle roller to facilitate the panel loading/uploading
  •   Dedicated saw parallel fence (lenght 1500 mm)
  •   Angular cutting device with 2 flip-over stops equipped with telescopic fence with 2 flip-over stops and pre-set angle rapid selection
  •   Pre-set angular cutting device directly positioned on squaring frame
  •   Electrical protections
  •   Emergency pushbutton

ÉQUIPEMENT NORMES “CE”

  •   Scie circulaire à lame inclinable avec dispositifs conformes aux normes européennes et complète de moteur auto-freinant et Protection lames a pantographe

Options on Demand

  • Version with maximum squaring stroke 3260 mm
  • Powered sawblades unit lifting and tilting
  • Additional table on the sliding table for the support of panels with large dimensions
  • 2 saw blade rotating speed (3500/5000 rpm)
  • Digital readout for parallel fence positions complete with digital display and magnetic band
  • 3-phase motor 7,5 Hp 5,5 kW 50 hz (9 Hp 60 hz)

ASK FOR A QUOTE

Fill out the contact form to send us your request immediately.
We will reply via email or contact you within 48h to investigate your needs.