SPINDLE MOULDER F 700

F700

TECHNICAL DATA

SPINDLE MOULDER WITH FIXED SPINDLE
Overall dimensions of the table mm 1000×750
Spindle moulder shaft diameter mm 35
Working stroke of the shaft mm 150
Spindle moulder shaft rotation speed g/1’ 3000-4500-6000-8000
Maximum cutter Ø mm 250
Power supply Volt 400 + Neutro
Motor power (three-phase) HP- Kw 5.5/4
Net weight Kg 430

F700 PL

TECHNICAL DATA

SPINDLE MOULDER WITH FIXED SPINDLE WITH TABLE ESTENSIONS
Overall dimensions of the table mm 1000×750
Table dimensions with extensions mm 2000×400
Spindle moulder shaft diameter mm 35
Working stroke of the shaft mm 150
Spindle moulder shaft rotation speed g/1’ 3000-4500-6000-8000
Maximum cutter Ø mm 250
Power supply Volt 400 + Neutro
Motor power (three-phase) HP- Kw 5.5/4
Net weight Kg 500

F700 C

TECHNICAL DATA

SPINDLE MOULDER WITH FIXED SPINDLE WITH FRONT CARRIAGE
Overall dimensions of the table mm 1000×485
Sliding table dimensions mm 1000×245
Tenoning stroke 500
Spindle moulder shaft diameter mm 35
Working stroke of the shaft mm 150
Spindle moulder shaft rotation speed g/1’ 3000-4500-6000-8000
Maximum cutter Ø mm 250
Power supply Volt 400 + Neutro
Motor power (three-phase) HP- Kw 5.5/4
Net weight Kg 460

F700 T

TECHNICAL DATA

SPINDLE MOULDER WITH FIXED SPINDLE AND LATERAL TENONING CARRIAGE
Overall dimensions of the table mm 1000×750
Lateral tenoning carriage dimensions mm 900×300
Tenoning stroke 800
Spindle moulder shaft diameter mm 35
Working stroke of the shaft mm 150
Spindle moulder shaft rotation speed g/1’ 3000-4500-6000-8000
Maximum cutter Ø mm 250
Power supply Volt 400 + Neutro
Motor power (three-phase) HP- Kw 5.5/4
Net weight Kg 500

EQUIPMENT FOR “CE” NORMS

  • Low-voltage switchboard in accordance with European EC regulations
  • Electrical provision for feed connection
  • Self-braking motor
  • Adjustable spindle moulder shaft protection with suction outlet (ø 150 mm)
  • Protection on spindle moulder hood
  • Protective hood for working on the spindle moulder shaft
  • Speed’s indicator
  • Mechanical gauge for rise/fall of the spindle
  • Suction hood under working table (ø 120 mm)
  • Tenoning table – Only available for F 700C and F 700T versions
  • Tenoning hood – Only available for F 700C and F 700T versions
  • Maintenance manual and spanners

ACCESSORIES ON DEMAND

N PL C T
Right/left rotation for spindle shaft
Self-braking motor Kw 5,5(HP 7,5)
Electronic gravity spindle height indicator
Roller on the right-hand side of the table
Removable feet to facilitate handling and positioning of the machine in the workshop
Table extension on right-hand side

• Available
– Not available

REQUEST A QUOTE

Fill out the contact form to immediately send your request.
We will reply by email within 48 hours or contact you to investigate your needs.